General purpose gelcoats.
ORTHO or Iso-ORTHO gelcoats for producing articles for different intended uses, depending on the technical characteristics required. They provide good resistance to UV radiation, while isophthalic-orthophthalic resins provide high surface hardness and good stability in relation to weather in general. Both series are available in a wide range of colours and in topcoat version.
Articles
| PRODUCT | Use | Chemical Type | Version | Viscosity | Gel Time | Exothermic Peak | Styrene Content | HDT | Barcol | Minimum order |
|---|---|---|---|---|---|---|---|---|---|---|
| H01E Gelcoat recommended for producing articles with medium UV resistance. Suitable for producing protective casings, vehicle body parts and cladding panels | Indoor use | O | S, R, P | 4500-14000 | 7-17 | - | - | 55 | 45 | 25 |
| H03E Gelcoat with high surface hardness and good stability in relation to the weather. Used for the production of small boats, silos, advertising panels and industrial casings | Indoor/Outdoor use | IO | S, R, P | 1000-14000 | 7-17 | - | - | 65 | 45 | 25 |
Legenda
Applications
| Cod. | Description |
|---|---|
| S | Spray |
| P | Brush |
| R | Roller |
Measure Unit
| Dimension | Description |
|---|---|
| Viscosity | mPas |
| Gel time | minutes |
| Exothermic Peak | °C |
| Styrene Content | % |
| HDT | °C |
Version
| Cod. | Description |
|---|---|
| A | With Mould releaser |
| P | Topcoat |
| Z | Standard |
| S | Without fiber |
| C | Chopped strand |
| M | Milled fiber |
Chemical Nature
| Cod. | Description |
|---|---|
| O | Orthoftalic |
| D | DCPD |
| I | Isophtalic |
| IN | Iso – Npg |
| IO | Iso – Ortho |
| OD | Ortho – DCPD |
| VE | Vinylester |